Ramps

72x individual ramps needed for RoboCup 2019.

Crossing (regular and rotating) and Continuous Ramp terrains are based on the same terrain elements, arranged in different ways.

ramps

The ramps themselves have a slope of 15 degrees and take up a footprint of 150 x 150 mm (6 x 6 in). For ease of construction, it is assumed that datum is approximately one thickness of OSB.

ramps-components

Each offset Z pallet (regardless of configuration) requires 32 ramps. Each ramp consists of the following components.

  • 1x 15 x 150 x 152 mm OSB sheet
  • 1x 15 x 120 x 36 mm OSB sheet (Note, 120mm dimension should be 150mm – 2x thickness of OSB)
  • 2x triangles 15 x 147 x 36 mm OSB

It is recommended that the ramps are nailed or stapled together. They may instead be glued together with the assistance of a suitable jig.