The Open Academic Robot Kit

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

Example parts list (TOTAL: $500 AUD): 
  * 7x Dynamixel AX-12A servos, $345 AUD
  * Raspberry Pi 2B, $43 AUD
  * Raspberry Pi camera, $39 AUD
  * Raspberry Pi camera 2ft (60cm) extension cable, $5 AUD
  * Wireless LAN adapter, $5 AUD
  * 8GB MicroSD card, $6 AUD
  * OpenCM 9.04 board, $26 AUD
  * 3 cell LiPoly battery, $10 AUD
  * Mobile phone emergency charger, $10 AUD
  * XT-60 battery connector, $1 AUD
  * [[designs:emumini2:fasteners|Nuts, Bolts, Wire, Misc components]], $5 AUD
  * 3D printed plastic components, $5 AUD

Additional recommended components (TOTAL: $106): 
  * PiTFT screen, $60 AUD
  * DC barrel connector, $3 AUD
  * 12V power adapter for running off mains during development, $22 AUD
  * 2x 1n4004 diodes to prevent backcharging, $1 AUD
  * TP-Link TL-WDN3200 802.11a wireless LAN adapter, $29 AUD
  * 2A 5V Voltage Regulator (RC Battery Eliminator), $6 AUD
  * (Remove mobile phone emergency charger), -$10 AUD
  * (Remove Wireless LAN adapter), -$5 AUD

The specific parts list for the demo kit is available [[designs:emumini2:demopartslist|here]].

The Open Academic Robot Kit

User Tools

Site Tools

Page Tools